home *** CD-ROM | disk | FTP | other *** search
/ HPAVC / HPAVC CD-ROM.iso / pc / HOMEMADE.ZIP / HOMEMADE.TXT < prev   
Encoding:
Text File  |  1998-01-20  |  2.8 KB  |  61 lines

  1. I Zoxxon take no responsibility for the use of these items stated
  2. herewithin. This textfile is presented for informational use
  3. only. The comments are added to most of the things i have
  4. attempted. All of the origional authors names have been deleted
  5. for privacy. All telephone numbers have been deleted also in
  6. order to preserve secrecy.
  7.  
  8. Some articles are from the ill-fated,
  9.   "THE POLICE STATION"   BBS
  10.  
  11.  
  12.   Homemade Bombs (Just the way Mom used to make 'em)
  13. Explosive Devices   An anarchist's beginning guide to explosives!
  14. (or how to get back at those neighbors who told you to turn your
  15. stereo down by blowing em up!)
  16.  
  17.    1.Quickie...   Take organic pool chlorine and mix it with
  18. vegetable shortening and put it someplace you don't like. It
  19. reacts by itself to produce a very noxious white smoke and heat.
  20. *make sure you are not around because the fumes are harmful to
  21. your health.
  22.  
  23.    2.A pipe bomb (dangerous)   Take a pipe, crimp (closed at one
  24. end) and pack it 3/4 full of paraffin (or any other semi-solid
  25. with about the same basic chemical structure), poke a number of
  26. holes through the length of the paraffin. On top of this put a
  27. very thin steel (or other metal of that sort) wafer, make double
  28. damn sure** that it fits tightly all the way around. On top of
  29. this put some high concentration HCL (or similar acid). Close the
  30. top now, stand it on end (paraffin end down), and get the fuck
  31. away. You should have about 2-5 minutes depending on the
  32. thickness of the wafer. Watch out for shrapnel.
  33.  
  34. *sure you will..more like 5-30 seconds. better to use a vial on
  35. the bottom ,stand the pipe upright, tie a string around it and
  36. pull from far away.
  37.  
  38.    3. Snowball...   Take ammonium iodide, flour, & water and form
  39. this into a snowball. Leave this 'snowball' somewhere where it
  40. will do neat stuff when it dries out. (substituting some
  41. magnesium flash powder for some (not all) of that flour helps
  42. things a bit.)
  43.  
  44.    4.Fire bomb..   Take carbon disulfide and dissolve white
  45. phosphorous in it. Put it in a stoppered bottle and throw it at
  46. something you would like to see on fire. When the CS2 evaporates,
  47. it leaves a film of P on what ever it hits, and it starts a fire
  48. with the solvent vapors.
  49.  
  50.    5. Light bulb bomb (click...booom!)   Take a light bulb (brass
  51. based preferably so you can solder the wires back when you are
  52. done) Unsolder the two wires that are soldered to the brass (one
  53. at the center of the base and one on the edge). Remove the base,
  54. taking care not to damage the bulb or filament, then take a pair
  55. of needle nosed pliers and snap the glass nipple that is now
  56. exposed. Fill bulb (not completely),via the hole you just made,
  57. with gasoline. Plug hole with silicone or something. Put the base
  58. back on, resolder the wires, screw into light fixture (with power
  59. off of course!), turn on light...booom! *easier to use a
  60. mini-power-drill.
  61.